The Original ThreadMaster Formula that set new standards for clarity and leveling in a Polymer Thread Finish. The High Build formula was designed for one or two coat application depending on the final desired film thickness. Characterized by its accelerated cure cycle, glass like leveling, superior depth of image and gloss and long term water white clarity, ThreadMaster High Build also exhibits the unique characteristic of being quite a hard, durable finish, yet very flexible. This is the finest finish for decorative threadwork of all kinds….extremely durable and flexible with an ultra high gloss and virtually water clear. ThreadMaster High Build is the perfect finish for all rodbuilding applications, be it the large factory OEM, the high volume custom shop, or casual weekend builder who needs a quick curing, high performance thread coating.
- Mix Ratio: 1:1
- Potlife: 25 minutes
- Rotation Time: 2-3 hours
- Tack Free: 4 hours
- Re-Coat Time: Within 24 hours
Hazardous Material. Must ship ground only. Not eligible for expedited shipping. Contiguous 48 states only. A physical address is required for delivery.
Notice--LTD QTY Return Shipping.
LTD QTY - In the event you wish to return this item, due to regulatory requirements, please contact customer service and we will provide the special shipping label and instructions required for the return of this item.
I tried Thread Master and it is a top quality finish. It produces an extremely clear finish that when totally cured, feels like marble. While many of the top competing products are excellent, this one has that extra percentage of hardness, shine, depth and elegance.
Tips on using: 1) Make sure you warm the bottles before using. Do not use cold. It should be body temperature or slightly above by 5-10 degrees; 2) Room temperature minimum 70 degrees, 74 degrees is better. 3) You need to turn the rods for a minimum of 3 hours. This finish takes a bit longer than competing products; 4) This finish needs more cure time before use. After one day, the finish feels spongy-hard with some tackiness. After 2 days, a bit less spongy. After 3 days, it becomes smooth-hard. My recommendation? Wait 5-7 days before putting the rod to use. You will get an incredibly hard, yet flexible finish. This is an outstanding product! I have been building rods for 42 years. Epoxies such as the old Diamond II were great. They have not changed much over the years. This product has that extra touch of quality and durability that will be admired and enjoyed for many years!