Save money when you buy in bulk! Assembled with a durable spiral-wrapped grit tape wound onto a tapered fiberglass tube, the all-new CRB Tape Reamers are an economical way to bore out the inner diameter of grips of all type: cork, eva foam, even WinnDry® polymer.
- Hand use only - not recommended for use under power
- 7 distinct bore diameters to cover grips for ultralights all the way up to offshore trolling rods
- Can be used to ream cork, EVA foam, WinnDry® polymer material and more
Sizing & Specifications
|Part No.||Size||Length||Outside Diameter||Qty|
|TR-XS||X-Small||16"||.200" - .250"||1|
|TR-S||Small||16"||.255" - .315"||1|
|TR-SM||Small-Medium||16"||.300" - .350"||1|
|TR-M||Medium||16"||.330" - .380"||1|
|TR-ML||Medium-Large||16"||.360" - .405"||1|
|TR-L||Large||16"||.410" - .480"||1|
|TR-XL||X-Large||16"||.440" - .510"||1|
These are ok reamers if you want to make a few rods by hand. If you are expecting anything more look elsewhere. DO NOT ISE THESE IN A DRILL. I had some fail by hand and some fail in a drill. It is just sand paper on a piece of rod blank and the blank started to disintegrate on the ones that failed by hand. The ones that failed in a drill just twisted as soon as any heat was created.
Hey Derek, Thank you for reaching out with your experience using these reamers. As stated in the description, these reamers are for hand use only and we do not recommend them to be used with a drill. We are going to have one of our customer service representatives reach out to you and get you taken care of. - Mud Hole Custom Tackle