CFX Composite Carbon Fiber Grips - Foregrip
Specifications
CFX Composite Carbon Fiber Grips - Foregrip
Product Details
Traditional foregrips with a straight taper for spinning and casting rods, may also be used as mid-grips on split-grip handles.
CFX Carbon Fiber Composite Grips
CFX grips begin with a proprietary carbon infused core material. It is the weight of traditional 4 lb urethane foam but has the density and strength of 7 lb. It is stronger, lighter, and more dense than any grip material available. What this means to you is the ultimate in energy transmission, far superior to cork, EVA, hypalon or other carbon fiber grips.
CFX grips have a buffed matte finish that is comfortable, easy to grip, and impervious to UV breakdown. The end result is a beautiful grip that is lighter and more sensitive than any rubber based handle, translating to more bites felt, more hook sets and more fish in front of the camera.
Dimensions - Tapered Foregrip
| Model | Length | I.D. |
|---|---|---|
| FG150 | 1.50" | 0.375" |
| FG225 | 2.25" | 0.375" |
| FG325 | 3.25" | 0.375" |
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
Awesome grip straight up clean
Great fit and finish with these grips. They ream super easy and feel amazing in the hand. 10/10 recommend
I think they're lighter than helium.Look awsome on my rods.zGet some!
I’ve used this foregrip on several builds it’s the perfect size for both ultralight casting and spinning rods.
Fit and finish is excellent. Just be careful reaming. A little goes a long ways.
Easy to ream and epoxy up for any type of rod you are building. Always a nice touch on any rod.
I really like these carbon fiber grips, they are very light and durable, they have a nice shine in the sunlight, I would recommend for the 2 inch one.
I used one of these on a swimbait rod build. Looks great and super lightweight.
I love the look of the carbon fiber after adding thread finish. It's definitely a lot easier to ream compared to cork. Definitely adds a more custom look.
Great quality
CFX is always great
Nice lightweight grips and super comfy. The fit and finish could be better, but only slightly. Much better than if I made them myself.
Good quality grip as always
I absolutely love the carbon fiber grips on any reel. They are super light weight and you have a good grip in any situation. And midsole had them in stock and got them to me in a timely manner. I love these grips and the people at mud hole!
Easy to ream and epoxy up and on any build.
They are great and easy to work with
These grips are extremely lightweight and allow for maximum sensitivity. Easy to install and they look great on the rod as well. Four stars because of the higher cost.
Made very nuce
Really do enjoy this product I will continue using it for all my rods
Great grips, and they look sick on rods
I use these about 90% of the time on my builds. So far they hold up great. Rods I’ve built rods for people, they say they really like the feel of the grip. So far they are holding up, I built a fly rod about 3 yrs ago and they are holding up fine.
Haven’t even taken them fishing yet and they already peeling. Not worth wasting your money ask other people who bought them and they experience the same thing.
🙄
Good luck!
Hello Mud Hole!
I’m planning on building a Musky casting rod using CFX grips paired with a Fuji TCSM-17BC reel seat.
The rear grip will be the CFX FRG14 matched with the Fuji seat the length will be around 18.94 inches from the butt of the blank to the top of the seat.
The blank is a 7’6” TR MF Composite Raw from Thrasher with a butt diameter of .687”. Will the CFX FG325 work with an ID of .375”? Thank you
Hey Bart, the CFX grips can be reamed out much like a cork grip or EVA, so depending on the diameter of the blank at the point that you plan on putting the grip it should be able to be reamed to fit it. - Mud Hole
