American Tackle Tsuka 2 Carbon Handle System – Spinning
Specifications
American Tackle Tsuka 2 Carbon Handle System – Spinning
Product Details
Winner of ICAST 2023 Best in Show, the Tsuka 2 Carbon Handle System from American Tackle is the first fully integrated forged carbon rod handle ever released—redefining the future of performance rod design. Built using advanced blow-molded carbon fiber construction, the Tsuka 2 is available in both Matte 3K and Forged Carbon finishes for spinning or casting configurations.
Whether you're crafting a custom build or retrofitting an existing rod, the Tsuka 2 offers unmatched durability, ultra-light weight (just 1.635 oz.), and the sensitivity serious anglers demand. The slim, ergonomic profile improves comfort and control, while a molded rubber end cap protects your investment. Includes fitted neoprene sleeve for added protection.
Key Features:
- ICAST 2023 Best in Show award-winning carbon handle
- First-ever forged carbon fiber handle system
- Blow-molded for extreme strength-to-weight ratio (just 1.635 oz.)
- Molded rubber end cap and ergonomic trigger design
- Carbon fiber foregrip with sleek aluminum trim
- Retro-fit or use in new custom builds
- Includes fitted neoprene sleeve
Recommended:
Install ASCHL, to cover the gap between the seat part of the Tsuka 2 handle & rod blank
Specifications
| PRODUCT | PRODUCT DIMENSIONS | WEIGHT (oz) | BUTTCAP DIAMETER |
| TSUKA2S-MFC | 14.688 x .955 x 1.065" | 1.635 | .898" |
| TSUKA2S-M3K | 14.688 x .955 x 1.065" | 1.635 | .898" |
Proprietary Construction
Extreme Strength / Weight
Ergonomic Design
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
I mounted my new Tsuka 2 to a MHX 2-piece spin jig blank and it feels incredible. I needed to add a couple of ounces of lead to the butt to get the balance right and it’s still the lightest rod I own. Love it!
Nice feel. Lighter than I thought it would be. I usually don’t like hard handles but this one seems comfortable. Can’t wait to fish it.
Feels comfortable in the hand. We'll built but I was disappointed in the butt cap for what the cost of tsuka 2 is, it's just a cheap rubber cap that I didn't use.
This handle is super light and tough
Just completed my first build with this handle. I had 6’ 8” blank that this handle allowed me to build at 7’ (couple of cuts to zero in on the 7’ desired length). Arbor, paste and go. speeds up the build process. Incredibly light. Put 3/4oz of weight in butt to balance the rod with reel in the seat. Used it to fish walleye. Really pleased with the transmission of a bite through the blank and ultimately, the handle (jigging 1/8oz swim bait). Definitely will be using on future builds.
I love the grip reel seat piece of equipment. Less time in rod building and the actual sensitivity while fishing is great. It is like holding on to you blank directly, feeling every bump of a rock or the tick of a strike.
Very easy to install. Can order a shorter rod or cut one you have to get required length. Can be an upgrade to any old favorite rod and installed from butt end of rod. No need to retire guides
I’ve done three builds on these now and they are super easy to build on. One spinning and two casting. No grip boring, less winding checks and super easy. You could build on it with no checks as where you might put one is up under the hood. I’ve used a couple of different checks with it but I think I like the tapered cone shaped one the most. Just build up some tape and good to go for epoxy. You do have to get used to cutting your blanks down which is a bit unnerving to start with but the up side is it gives you opportunity to select your total length. So I built a 7 foot drop-shot rod from a 7 3 blank. It turned out nice. I tied a weight hanger back on where it would have been a split grip with no issue. I think it looks good and should be very functional. The grip/seat is super light as well. You do pay for it though. A little on the expensive side. Depending on what you typically build with it could be 100% more expensive. If you want to do a super light, high end build this is a great option.
Fun to build fast ,easy easy worth the price! Built on American Tackle Matrix PFR 3 this becomes my new jurk bait rod!
Light feels and looks amazing meant for bass but I use it for snook tarpon reds and everything imbetween
Very nice and light handle. Only issue is I thought it came with an aluminum butt cap.
I think it will be great to fish.
Tossed around buying this for a while. Hundred dollars for me is a lot of money for a reel seat and grip. Finally pulled the trigger for a steelhead rod, MHX ST103F. Best decision of my rod building journey. Easy to assemble, looks great and feel in my hand was next level. I'll be using this going forward.
You can feel every little touch on this handle
I’m just finishing up the build and must say the Tsuka2 was so simple to install.
Fast shipping! Excellent handles!
Great product! Pairs great for a drop shot rod! Super light weight!
First I’ll start by saying that this product functions great and has great sensitivity. It just looks like plastic that is trying to look like carbon fiber if you know what I mean, if that’s true it would be disappointing with it being such a high priced item.
easiest and best handle reel seat on the market, couldn't be more pleased with appearance and feel.great product
This handle and seat combo is excellent. Very light and easy to install. The instructional video is a great resource to see if this application will work for you particular build. I have built 2 spinning rods for clients, and they are overly happy with the results.
Have not made new rod yet, but handle feels great in hand, light weight, well made, looks stunning, will follow up after new rod build I'm sure I will use more in future rod builds
Nice 👍 addition to a spinning pole!!
Well to start I thought I was buying and American made product. Only to see it was made in China. Secondly I messed up in ordering and ordered the wrong inside diameter. So what I initially thought I would use for a steelhead rod ll now use on something else. Truthfully I'll be the last time I order on. Made in North America is huge for me and all the made in China cheap stuff mudhol brings in is starting to be a really turn off.
Tsuka 2 Carbon Handle for Spinning Rods
