ProKöte Rod Building Thread Finish, Preloaded Syringe Kit

This stuff SUCKS. I tried multiple coats and followed every tip and trick that the internet has to offer. It is still tacky. I spent big money on a rod build and it turned out like ****. You'd be better off using Elmer's. Don't buy.

Got this in a rod building kit from Mud Hole. 48 hours after application and still not cured. Very tacky to the touch. Don't know if I should keep waiting or just remove all my wraps and restart using something else.

Mud Hole has been fantastic to help me solve the problem of epoxy not curing.... they sent me a new product call "Gen 4" which is another brand of epoxy and I followed the directions and applied another light coat to the rod that I was having trouble with..... I let it cure 24 hours at an ambient temperature of 70 degrees +/- and it did great....Thanks Rick...I appreciate your help....problem solved

Mud Hole has been in constant contact with me to help resolve the curing problem... they encourage feedback so they can evaluate their products and make changes if needed.
This problem could possibly be my not being familiar with the product, but I tried to use it according to the instructions.....at any rate they are going above and beyond to find a solution... and I truly appreciate the effort on their part

Have used this product on 3 rods , the first of which cured properly...The 2nd and 3rd rods have been finished for 2-3 weeks and the epoxy will not cure completely.... I warmed the epoxy before mixing and I did mix for a timed amount of 5 minutes ... after application I left these rod turning in a warm room for 24-36 hours and they cured partially,,,!! I have been since December 7th trying to finish the curing process but to no avail....I called Mud Hole tech service and explained the situation and they recommended a second coat of epoxy which I did and still these rods won't cure....I did I did everything properly.................I'm lost I don't know what to do next....