Generation 4 Low Build Finish
Specifications
About Generation 4
Generation 4 Low Build Finish
Product Details
Note: The Part A Resin may exhibit variations in color ranging from a light blue to a blue-green hue. Please be assured that this alteration in color does not adversely affect the performance or quality of the product.
Over 2 years in development, Generation 4 guide wrap finish is quickly setting new standards in the rod building community for "on the wrap" performance. Gen4 provides the discriminating craftsman with the most robust set of performance properties in the industry. Featuring the most chemically advanced air release protocol (XAR) on the market, and now with our new UV2 ultraviolet inhibitor, Gen 4 has become the "clear choice" for high performance guide wrap coatings.
Generation 4 is available in both high and low build viscosities and is packaged in 4oz. 8oz. 16oz, 32oz, gallon and 2 gallon kits.
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
When applied on threads it highlights the color of thread without bubbles
This is so user friendly. No bubbles compared to flex coat and prokote.
Love it: self leveling, easy application, lube!
Gen 4 Low Build does everything that we want any thread epoxy to do. It levels well, it disperses bubbles well, it is clear and stays that way well, and it is easy to get the build thickness one wants on their threads. I like the "no football" look, with smooth, straight, no curve in the length of the wrap look, and low build does it well. Often with one coat, but even with two, just don't load it on heavy, keep it a little sparse, and even double coats will have that straight yet deep look that I like.
As comments say, very few bubbles so less need to heat after application.
Longer pot life than FlexCoat light so you can finish a 13ft two piece rod with less haste than FlexCoat. Will see final results and wearability after second coat and use but seems good so far.
