CRB Advance Polymer Tip & Ferrule Cement
CRB Advance Polymer Tip & Ferrule Cement
Product Details
New and Improved formula, perfect for installing Tip Tops on all styles of Fishing Rods. The CRB tip cement is the best tip glue at the best price on the market.
CRB's new advanced polymer glue stick features:
- Higher Melting Point
- Stronger Bonding Strength
- Longer Working Time
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
The tip top glue is very hard and difficult to cut with a blade. Saw one of your videos where the tip of the glue is heated and the melted glue drips on the table. I can then roll it so it fits into the tip top. Cutting the rolled section is easier if needed to fit the tip top. Very secure tip top once on with this glue.
It's all I use for tip tops
Stuff is like concrete for your tip top. Use it on all my builds
Use it for all my tiptops
Use it for all my tiptops
El producto hace bien su trabajo, mucho más que la reciba sencilla para guías. Si deseas dejar bien pegadas tus puntas de cañas este es el producto ideal.
Works great
This tip top adhesive works phenomenal and is very strong. Every rod builder has to have this and could also be used underneath your guide foot to secure to your rod before wraps. The stick will last you long time and will do hundreds of rods.
Works well. But I have to shave off little pieces and then chop them up so I can fit down tip. Wish it was in a spaghetti like shake like the FC one.
Used on 5 rods and have plenty
I like the polymer tip and ferrule cement, in fact I like it so much
I use it for both rod tips and guide feet. It can sometimes be
a little tougher to remove if you get it in the wrong place but
not impossible. It's a great product for rod tips and guide feet and one less product I have to stock. Alan Armstrong
I cut the stick down into small pieces, and load the tip, Instead of smearing it on. Has a harder set this way. Works well!
Great ferrule for installing tips
I have used this for all my tip tops. I put it in a hot glue gun and sting it out on aluminum foil.Then place it in the tip top with a bit of heat and press it on the tip of the rod. Works great
Very good
Easy to use with the razor trick, and easy to readjust after it dries if youre a perfectionist such as myself.
Works very good
Have used this in the past I use it in a glue gun make thin strip
Ordered as I ran out. This glue works very well to hold the tips.
CRB Advance Polymer Tip & Ferrule Cement
After breaking a tip, needed to replace, and bam here mud hole is, doing everything I needed. Was easily able to fix the rod with a new tip and guides.
works well.We use alot of it in the shop.
Buen producto, buen precio.
Easy to use.
Lightly sanded rod tip. Scraped off slivers and pre-loaded the TT. Heated stick, smeared some on rod tip. Heated TT pressed on rod. Dunked in water to cool. Done.
Should be repairable with a lighter or match if it ever comes loose.
Fished it last weekend in Texas heat, and everything fine.
I use similar (if not same) product and method on broadheads. I doubt the TT takes more stress than a broadhead impact.
Time will tell if it is as good as epoxy, but so far I'm sold.
Awesome product. Works well and easy to use.
Product does glue well and easy to use.
I would love to give a review; however, they never were received.
