American Tackle AAWC Aluminum Winding Checks – Color Finish
Specifications
American Tackle AAWC Aluminum Winding Checks – Color Finish
Product Details
Add a custom touch to your next build with American Tackle’s Anodized Aluminum Winding Checks. Available in multiple vibrant colors and sizes to perfectly fit fly, spinning, or casting rods.
Features:
- Precision-machined anodized aluminum for durability and style
- Compatible with fly, spinning, and casting rod builds
- Offered in a range of designer colors and sizes (8.0mm–20.0mm)
- Also available in Polished or Matte finishes
Note: Color tone may vary slightly due to the anodizing process.
Winding Check Sizing Chart
| Model | ID (mm) | ID (inches) | OD (mm) |
|---|---|---|---|
| AAWC-8 | 8.0 | 0.315" | 14.0 |
| AAWC-9 | 9.0 | 0.354" | 15.0 |
| AAWC-10 | 10.0 | 0.394" | 16.0 |
| AAWC-11 | 11.0 | 0.433" | 17.0 |
| AAWC-115 | 11.5 | 0.453" | 18.0 |
| AAWC-12 | 12.0 | 0.472" | 18.0 |
| AAWC-125 | 12.5 | 0.492" | 19.0 |
| AAWC-13 | 13.0 | 0.512" | 19.0 |
| AAWC-135 | 13.5 | 0.531" | 20.0 |
| AAWC-14 | 14.0 | 0.551" | 20.0 |
| AAWC-145 | 14.5 | 0.571" | 21.0 |
| AAWC-15 | 15.0 | 0.591" | 21.0 |
| AAWC-16 | 16.0 | 0.630" | 22.0 |
| AAWC-17 | 17.0 | 0.669" | 23.0 |
| AAWC-18 | 18.0 | 0.709" | 24.0 |
| AAWC-19 | 19.0 | 0.748" | 25.0 |
| AAWC-20 | 20.0 | 0.787" | 26.0 |
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
Love these winding checks they make your rods look great I recommend them to all rood buildes
The color was perfect for my wrap and it made the rod look professional! It also fit like a glove!
Great for adding trim and a splash of color to any custom build.
Not only for typical winding check placement but also behind reel seats to give a custom look.
I like to have a complete finished look on my rod builds. The aluminum winding checks allow me to color match for a more complete finished look.
Used these on a swimbait rod I built. They look good.
Aluminum windings look so much better than rubber windings. A definite must if you are building a custom rods.
Very nice color. Double check your measurements so you don’t order too small as I did. Easy to scratch IMO.
Good quality item
Love the look
Love the look
Love the look
Love the look
Love the look
Love the look
Love the look of these
Very happy happy with this product, fit and finish.
A little more copper colored than pictured. But the item description warns that colors may be little off.
Aluminum winding check come in multiple colors and sizes. Easy to ream to get that perfect fit.
I use anodized winding checks because I like the way anodized aluminum looks . I am epoxying them also just for added shine and protection.
Excellent customer service. Quality products!
Perfect size to cap off carbon fiber grips.
I really like how these winding checks look. Love the style and color varieties. I wish Mud Hole would publish a formula with all the rods so you could figure out the correct size to order to save shipping.
Great product
I ordered a st1084f-MHX what size winding checks should I order?
Hey David, The size of the winding check is going to be determined by the diameter of the rod blank at the point that you would like the winding check to sit. Here is a link to the page that lists that blanks measurements - Mud Hole
