Generation 4 Low Build Finish
Specifications
Generation 4 Low Build Finish
Product Details
Note: The Part A Resin may exhibit variations in color ranging from a light blue to a blue-green hue. Please be assured that this alteration in color does not adversely affect the performance or quality of the product.
Over 2 years in development, Generation 4 guide wrap finish is quickly setting new standards in the rod building community for "on the wrap" performance. Gen4 provides the discriminating craftsman with the most robust set of performance properties in the industry. Featuring the most chemically advanced air release protocol (XAR) on the market, and now with our new UV2 ultraviolet inhibitor, Gen 4 has become the "clear choice" for high performance guide wrap coatings.
Generation 4 is available in both high and low build viscosities and is packaged in 4oz. 8oz. 16oz, 32oz, gallon and 2 gallon kits.
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
Works amazing
New favorite finish
Generation 4 Low Build Formula is terrific. Mix for 4 minutes using CRB epoxy mixer. Apply to two or three wraps liberally. Go back to the first wrap, warm (not heat) just until viscosity loosens, and allow excess to sag at the bottom of the wrap with the guide up. Wick off excess. Repeat for wraps two and three. Repeat for all guides, three at a time. Works wonderfully for me every time.
Best finish
This is really good stuff. One of the two ingredients is colored and that helps with mixing. I use a barbecue rotisserie to turn the rod while I apply the mixture in the noontime and the finish came out great with no bubbles. It has a long life mixed before it starts to harden. This is my second batch and if I need more than this is the stuff I’m going to get
