MHX S-Glass Rod Blanks
Product Details
MHX S-Glass Blanks
MHX has updated the traditional S-Glass woven fabric and incorporated a new hardened resin system, while also updating the finish to a translucent caramel color. These blanks now have much smaller diameters in both the butt and tip sections, are more responsive, and provide superb sensitivity. The soft tip flex of these models are awesome for crankbait, chatterbait, top water and live bait applications!
Get More with MHX
Individual Serial Numbers
Limited Lifetime Warranty
MHX S-Glass Rod Blanks
Featured Technology
MHX 12 Million Modulus S-Glass
Ultra Resin System
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Product Chart
SSP843 / 7'0" / 6-12 lb.
SSP843 / 7'0" / 6-12 lb.
SSP903 / 7'6" / 6-12 lb.
SSP903 / 7'6" / 6-12 lb.
Customer Reviews
This blank is what I was looking for - a fiberglass blank with a deep bend under load. Yep, it'll bend clear down to the butt under load. The blank is light for a piece of fiberglass, but...
The rod's weight with my ancient old metal spinning reel positioned where I wanted it was very tip-biased. I added a significant amount of weight to the butt of the finished rod to bring the balance point back to a few inches in front of the reel stem. So much or the light weight... No biggy though, I'm no weight weenie. The balance lets me cast and retrieve lures for hours on end with no issue.
The rod excels at its intended task and, bonus, is surprisingly great as a general-purpose rod for me. Those of you younguns that grew up with and are accustomed only to fast and x-fast graphite rods may not appreciate this heavier, more "noodly" blank. It's not one of the old buggy-whips, but there's a lot of flex in this baby.
Sensitivity is great; I can feel when a 2.5" smelt nibbles, feel its high-speed wiggle / tail beat when it's hooked. I wasn't expecting that from a fiberglass rod rated for 10-17lb line.
Relevant build info follows.
Blank: MHX SSP845, 10-17lb 3/8 - 3/4oz MF H
Reel seat: Fuji NPS, size 18
Guides: Pac Bay Minima TV, SV, F, and PT
Paired reel: Greenie Penn Spinfisher 710, spooled with 50 yards of 15lb mono as a top shot, followed by a bunch of braid and a little Dacron.
A 3/4oz Krokodile will regularly cast beyond my 50 yard mono top shot.
MHX 7'0" Medium S-Glass Rod Blank - SSP843-MHX
I like the way it feels and sets up. I love a good glass rod for deep cranking.
I like the color of the blank but I had some issues right away. A standard size 16 reel seat will only slid down to about a foot away from the bottom of the blank because of how big the diameter is of the lower section of the rod blank. It was also difficult to ream out the lower cork section of the handle to make it fit. Plus I had to turn some custom wood and cork rings to make up the difference, as the stock cork lower section wasn’t long enough because of that. And boy it that blank heavy in weight compared to a carbon fiber rod blank. But I kind of expected that but it still took me by surprise.
Here in Minnesota, it will be a couple of months yet before I get a chance to use it but I am hoping that it will work better for crank bait fishing than my other rods.
This rod really exceeds with reation baits
