Elmer's Rod Builder's Cork Filler
Specifications
Elmer's Rod Builder's Cork Filler
Product Details
This great new filler works excellent on all kinds of cork grips and can be used to repair & recondition otherwise sorry looking handles. 3.25 fluid ounces.
- Sands easily to a smooth finish
- Resists shrinking + cracking
- Easy water clean-up
- Solvent free
- Must be used with Cork Seal (U403)
Preparation:
Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.
Filling:
Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.
Sanding:
Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.
Finishing:
Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.
Warning: California's Proposition 65
Proposition 65 Warning
CA WARNING.
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov
Files & Documents
