|Application||Crankbait, Rattle Traps, Twitch Baits|
|Lure||3/8 - 7/8 oz.|
|Material||38MM Toray Fiber Blend|
The CCB865 X-Composite rod blank is engineered with a moderate action and a medium-heavy power for the perfect flex in treble hook applications and more. The MHX X-Composite series are as much as 40% lighter than comparable standard graphite models and incredibly sensitive. Whether fishing crankbaits, rattle traps, or twitch baits, the 7'2" CCB865 blank brings the performance to match!
MHX X-Composite Rod Blanks
Created for mid-range to shallow depth crankbaits, the X-Composite construction provides the soft tip flex that anglers prefer from a crankbait rod. Utilizing graphite material in the butt area of the rod blank for overall blank lighter weight as well as a soft fiberglass tip section, these blanks are perfect for short lipped cranks or vibrating, lipless rattle baits. Experience all the performance the X-Composite has to offer!
MHX Included Accessories
Get More with MHX!
- Tip protector
- Rod blank cleaning wipe
- Rod specs decal with unique serial no.
- Metallic MHX rod decal
- MHX window/bumper sticker
- Limited lifetime transferable warranty
MHX Limited Lifetime Transferable Warranty
Quality you can trust. MHX again sets the standard with our exclusive limited lifetime transferable warranty. Each rod blank can be registered online with its individual serial number by either the custom rod builder or the end user of the rod. When registered, the blanks unique serial number identifies that rod blank to registrant. If the registrant sells or gives the rod blank or finished rod to another person, the warranty can be transferred to the new owner – an industry first! In order to activate your warranty, you must register your MHX rod blank. Warranty claims will not be accepted without a valid serial number on file.
Each MHX blank is designed and produced for specific applications and uses. The design information is listed along with each blank to provide the custom rod builder with usage and application suggestions.
Under a 7 point inspection system, blanks are checked for straightness, butt and tip diameter, weight & length – and are deflected to confirm correct power and blank action. This industry leading detailed inspection assures custom rod builders receive a blank which exceed their expectations.
INDIVIDUAL SERIAL NUMBERS
Once it has passed the quality control stage, each MHX blank is assigned an individual serial number. This assures that every MHX rod you build, fish, buy or sell can be tracked throughout it’s life cycle from end to end with no concern about warranty issues.
I like to wind stuff inshore specifically for flounder..small underspins,d.o.a. cal shads etc...ive built and bought ALOT of rods trying 2 find the magic stik 😉this one is it...it just replaced a dozen or more rods.."PERFECT"💯
I started this rod planning on just throwing rattle traps in grass with it, but feels perfect with a flat side crankbait too. Rod feels great with 11 inch cork handle. 9 inch just didn’t feel right on it to me. Would love to have another for a second trap rod, one more for flat side cranking and one more for square bills. I Ended up going with a Fuji pts with hidden thread cork and lzr medium guide kit. First trip out since getting it done was ripping the trap though grass and turned livescope out off the edge of the point and saw 3 big fish out about 25 feet deep right off the point. Dropped the trap to them and then a brisk 20 minutes later landed the 30 plus pound flathead catfish. Rod had plenty of backbone for the fight and enough flex to not straighten out the hooks as well. The rod is exactly what I was looking for. I was really worried it was gonna feel heavy but with the cork full grip I think it really balanced out well.